Swap Your Lenses in Minutes
Lens Installation
Swapping your old lenses is easy. Follow the guide below to learn how to replace them quickly and safely without stressing your frames.
Step 1
Turn your sunglasses around so you’re holding them from the back. With both hands, gently pull up on the top of the frame while pulling down on the bottom. This flexes the frame just enough to loosen the lens.
Step 2
While keeping the frame slightly pulled apart, place your thumbs on the inside of the lens and press it forward. Apply even pressure until the lens pops out of the groove. Don’t worry if you hear a few clicks or pops — that’s just the lens releasing.
Step 3
Take your LifeArt replacement lens and angle the upper nose edge into the frame first. Once it’s lined up in the groove, use your thumbs to work around the edge of the lens, pressing it into the frame little by little until it fully seats.
Step 4
Run your thumbs around the entire perimeter of the lens, pressing firmly but gently. This ensures the lens is completely secure and evenly fitted inside the groove of the frame.
